Best available quality KANTHAL spiral shape FeCrAl wire resistors insure furnace long life operation up to 1300 ˚C continuously. 

Extremely low mass vacuum formed thermal insulation enables high output available for the load and fast heat up rates while significantly contributes to energy savings under daily thermal cycling.

Control strategy focusing in high power factor for all workable temperature areas leads to energy savings and insures compliance with EMC (Electro-Magnetic Compatibility) standards.

Hinged - split tube – construction, operation position horizontal or vertical.

Temperature PID Control. Accurate and uniform temperature profiles.

Modern double wall construction keeps external surfaces temperature low, emphasizing in operator safety. Internal skin is exclusively made from stainless steel to enhance durability.

Ergonomic design with no protruding edges, bolts or other features combines stainless steel parts with painted finish parts for an improved esthetic result.

Furnace closure interlock prevents heaters powering, if furnace is opened, through mechanical conductors.

USB port for connection to a PC

Touch Screen Computer running PYROLOGISM software human-machine interface.

3 user process thermocouple inputs available (B, E, J, K, N, R, S, T type- software configurable).

Power and true RMS Current measuring circuits.

Heater failure, open control thermocouple detection, door open alarms and interlocks. Alarms and events front panel led array.

Stand alone over-temperature limiter (Watchdog) with manual reset in accordance with EN 60519-2 to protect the oven and load. Overrides main controller and cut off heater power if user adjustable high limit is reached.

主要特点\Key Features

规格Specifications

Standard features:

Maximum continuous temperature:

 1300˚C  Models

Operating Power: 208 /240VAC – 50/60Hz.

S type embedded thermocouples for SGM AW1-T-1300 Models.

K type embedded thermocouples for 1150˚C for SGM1150 Models.

Mounting orientation: Horizontal, and vertical.

Temperature control accuracy ±1 ˚C.

Semi-exposed resistors type. 

Single zone or three heating zone(s) configuration models.

Each zone is equipped with two independed thermocouples for controller and over-temperature limiter feedback.

Thermocouple inputs:3 chan. - B, E, J, K, N, R, S, T type -software configurable, 24 bit A/D conversion, 0-45°C cold junction compensated, Typical accuracy ±0.2% f.s @ 25 , resolution 0.1 °C

• Remote, touch screen temperature computer, running the specially designed PYROLOGISM 2.0 software on a 10.0in Tablet PC

• Programmable stand-alone over-temperature limiter (Watchdog) with manual reset in accordance with EN 60519-2 to protect the heater and load,

• UPS (Uninterrupted Power Supply) that will keep system alive for short periods of power failure and restore program after power recovery

Add suffix _UPS

CE Certified. Compliant with Low Voltage Directive 2006/95/EC (harmonized referenced standard EN 61010-1: 2001 and EN 61010-2-010:2003) andEMC Directive 2004/108/EC (harmonized referenced standard EN 61326-1:2006).

Produced in GREECE following ISO 9001:2008 quality management system and ISO 14001:2004 environmental management system.

1150˚C Single Zone Tube

Split Tube, Maximum Temperature 1150˚C, Single Zone, Universal Operation

1150˚C三温区管式炉M0˚C Three ZoneT ube

Split Tube, Maximum Temperature 1150˚C, Three Zone, Universal Operation

单温区管式 X0˚C Single Zone

Closed Tube, Maximum Temperature 1300˚C, Single Zone, Universal Operation

1300℃三温区管式炉X0˚C Three Zone Closed Tube

 Closed Tube, Maximum Temperature 1300˚C, Three Zone, Universal Operation

配件Accessories

End Gas Sealing Flanges and Manifolds.

THERMANSYS® is providing work-tube End Gas Sealing Flanges for vacuum or pressure conditions.

These flanges are provided with Main Port either with hydraulic thread port or with Clamp Flange (CF) port for gases inlet/outlet- connection to the tubing network. Cooling fluid recirculation compartment is standard and is removable. Up to four peripheral threads are available serving as ports for instrumentation mounting (e.g thermocouples, pressure sensors).

Versions with Clamp Flange (CF) port design provide quick-open loading port and optionally a quartz sight window.

Sgma® End Gas Sealing Flanges are supplied for work tubes diameters from 1΄΄το 3΄΄. Their design allows use with tubes having diameter tolerance ±10%.

Standard versions material of construction is Stainless Steel ASME 304. Optionally for corrosive applications Stainless Steel ASME 316 is available and Aluminum for a light weight solution (recommended for thin wall Quartz tube reactors).